Ramsey RE34.9

3.56 Tonne DC Electric Winch (12v or 24v)

For General Recovery Work

Heavy duty electric DC winch, designed for general commercial applications. Rugged  construction and low profile design enables  fitting almost flush with, or above, the vehicle  floor as required.

A 90mm x 215mm deep flange drum with rope  anchor wedge ensures good rope life expectancy.

Fully compliant with EN 14492-1 regulations.

file_downloadBrochure file_downloadManual mailEnquire


  • 3558kgf line pull
    Rated line pull of 34.9 kN
  • EN 14492-1 compliant
  • Emergency stop switch & safety solenoid
    Ensures shut down if control solenoid fails to open
  • Load limiting switch
    Pre set to provide mechanical overload protection
  • Worm & wheel drive
    Holds load safely without relying on a separate internal brake
  • RAM-LOK freespool clutch mechanism
    Spring loaded for positive engagement
  • Wedge pocket rope anchor on drum
    Major safety benefit – prevents rope release from drum
  • 10mm x 30m (1960Nmm2 grade) wire rope
    6 x 36 wire core construction for maximum flexibility
  • Heavy duty series wound motor
    12v and 24v models available
  • All gearing running in oil bath
  • Mounting frame or cradle mount options
  • Heavy duty roller guides
    Industrial design for rugged commercial use
  • Heavy duty wanderlead control
    Industrial quality two button with 4.5m lead
  • Low amperage draw
    Practical and obtainable at rated line pull
  • 12 months warranty
    On parts and service (excluding wire rope)
  • After sales service
    Technical advice given on winch fitting and component replacement, plus efficient overnight parts despatch and fast repairs.


  • Electric isolator switch
  • Auxiliary industrial 16 amp plug and socket kit for  wanderlead connection
  • Fuse and fuse holder
  • Snatch block
  • Radio Control Unit
  • Full or partial fitting can be provided, including load
    testing and certification


Electric Winch with emergency stop and safety solenoid; load limiting switch; 4.5m heavy duty 2 button wanderlead control; mounting bracket; industrial roller guides with  greaseways; 10mm dia. x 30m galvanised wire rope (1960N/mm2 grade) with safety latch hook.


Save time and money on installation – Ready to fit. A choice of three alternative winch control kits designed to provide all in one emergency stop, isolator switch, safety solenoid and power outlets.