Ramsey RE34.9
Ramsey RE34.9, 3.56 Tonne DC Electric Winch (12V or 24V)
For General Recovery Work
Heavy duty electric DC winch, designed for general commercial applications. Rugged construction and low profile design enables fitting almost flush with, or above, the vehicle floor as required.
A 90mm x 215mm deep flange drum with rope anchor wedge ensures good rope life expectancy.
Fully compliant with BS EN14492-1 regulations Power Driven Winches.
features include
- 3558kgf line pull
Rated line pull of 34.9 kN - BS EN 14492-1 compliant
- Emergency stop switch & safety solenoid
Ensures shut down if control solenoid fails to open - Load limiting switch
Pre set to provide mechanical overload protection - Worm & wheel drive
Holds load safely without relying on a separate internal brake - RAM-LOK freespool clutch mechanism
Spring loaded for positive engagement - Wedge pocket rope anchor on drum
Major safety benefit – prevents rope release from drum - 10mm x 30m (1960Nmm2 grade) wire rope
6 x 36 wire core construction for maximum flexibility - Heavy duty series wound motor
12V and 24V models available - All gearing running in oil bath
- Mounting frame or cradle mount options
- Heavy duty roller guides
Industrial design for rugged commercial use - Heavy duty wanderlead control
Industrial quality two button with 4.5m lead - Low amperage draw
Practical and obtainable at rated line pull - 12 months warranty
On parts and service (excluding wire rope) - After sales service
Technical advice given on winch fitting and component replacement, plus efficient overnight parts despatch and fast repairs.
ADDITIONAL EQUIPMENT & SERVICES
- Electric isolator switch
- Auxiliary industrial 16 amp plug and socket kit for wanderlead connection
- Fuse and fuse holder
- Snatch block
- Radio Control Unit
- Full or partial fitting can be provided, including load
testing and certification
RE 34.9 KIT COMPRISES
Electric Winch with emergency stop and safety solenoid; load limiting switch; 4.5m heavy duty 2 button wanderlead control; mounting bracket; industrial roller guides with greaseways; 10mm dia. x 30m galvanised wire rope (1960N/mm2 grade) with safety latch hook.
UPGRADE TO A BHW WINCH CONTROL SYSTEM
Save time and money on installation – Ready to fit. A choice of three alternative winch control kits designed to provide all in one emergency stop, isolator switch, safety solenoid and power outlets.